Grizzly G0869, Руководство пользователя, Страница: 29 / 72

Model G0869/G0870 (Mfd. Since 01/19)
-27-
Blade Installation
Review this section, even if your saw blade came
pre-installed.
To remove & install blade:
1. DISCONNECT MACHINE FROM POWER!
2. Raise arbor all the way up, then remove
table insert and blade guard/spreader (see
Page 28) or riving knife (see Page 31).
3. Push arbor lock in (see Figure 29) and rotate
existing blade until it locks in place (or rotate
arbor if no blade is installed).
To reduce risk of injury, always disconnect
power to saw before changing blades. Since
blade is sharp, use extra care and wear
gloves when installing it.
4. While pressing arbor lock, use included arbor
wrench to loosen and remove arbor nut,
flange, and blade (see
Figure 30). Arbor nut
has right-hand threads; rotate counterclock-
wise to loosen.
Figure 29. Location of arbor lock.
Arbor Lock
Figure 30. Example of removing table saw
blade.
5. Install new blade, flange and arbor nut on
arbor, as shown in
Figure 31, with teeth fac-
ing front of the saw.
6. Re-install blade guard/spreader (see Page
28) or riving knife (see Page 31), and table
insert.
Figure 31. Correct order of installation with teeth
facing the correct direction.