manualshive.com logo in svg

Grizzly G0869, Руководство пользователя, Страница: 11 / 72

Поделиться
Скачать
Grizzly G0869 Скачать руководство пользователя страница 11

Model G0869/G0870 (Mfd. Since 01/19)

-9-

The information contained herein is deemed accurate as of 3/3/2019 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 2

Model G0870

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0870 PORTABLE TABLE SAW WITH ROLLER

STAND

Product Dimensions:

Weight................................................................................................................................................................ 96 lbs.

Width (side-to-side) x Depth (front-to-back) x Height............................................................... 41-1/2 x 37-1/2 x 41 in.

Footprint (Length x Width)............................................................................................................................ 35 x 33 in.

Shipping Dimensions:

Type..................................................................................................................................................... Cardboard Box

Content........................................................................................................................................................... Machine

Weight.............................................................................................................................................................. 101 lbs.

Length x Width x Height....................................................................................................................... 31 x 30 x 24 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 120V, Single-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................ 15A

Minimum Circuit Size.............................................................................................................................................. 20A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length................................................................................................................................................. 6 ft.

Power Cord Gauge......................................................................................................................................... 14 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 1-15

Switch Type................................................................................................................................ ON/OFF Push-Button

Motors:

Main

Horsepower................................................................................................................................................ 2 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 15A

Speed............................................................................................................................................. 20,000 RPM

Type..................................................................................................................................................... Universal

Power Transfer .................................................................................................................................... Gearbox

Bearings........................................................................................................ Sealed & Permanently Lubricated

Main Specifications:

Main Information

Table Saw Type.................................................................................................................................... Portable

Maximum Blade Diameter......................................................................................................................... 10 in.

Arbor Size................................................................................................................................................. 5/8 in.

Arbor Speed....................................................................................................................... 2,000 to 4,000 RPM

Maximum Width of Dado...................................................................................................................... 13/16 in.

Blade Tilt Direction....................................................................................................................................... Left

Max Blade Tilt........................................................................................................................................ 45 Deg.

Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.

Maximum Depth of Cut At 45 Degrees.................................................................................................. 2-1/4 in.

Max Rip Right of Blade w/Included Fence & Rails........................................................... 28 in. w/4" Table Ext.

Содержание G0869









































































Отзывы:

Нет отзывов