Grizzly G0836, Руководство пользователя

Страница: 21 / 60

Model G0836 (Mfd. Since 09/17)
-19-
Power Connection
After you have completed all previous setup
instructions and circuit requirements, the machine
is ready to be connected to the power supply.
To avoid unexpected startups or property dam-
age, use the following steps whenever connect-
ing or disconnecting the machine from the power
supply.
Connecting Power
1. Press emergency stop button.
2. Use 18AWG cord to connect 5A power sup-
ply adapter, and use 16AWG cord to con-
nect power supply receptacle on column, as
shown in
Figure 15.
Figure 15.
Power supply connections.for column
and power feed.
Power Feed
Power Cord
Power Supply
Receptacle
(16AWG Cord)
5A Power
Supply Adapter
(18AWG Cord)
3. Connect each of two 5-15 plugs and 1-15
plug to matching receptacles, then proceed
immediately to
Test Run.
Note: Make sure power cords and cables do
not interfere with table movement.
Figure 16. Resetting Emergency Stop button.
Test Run
Once assembly is complete, test run the machine
to ensure it is properly connected to power and
safety components are functioning correctly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from
power, and fix the problem BEFORE operating the
machine again. The
Troubleshooting table in the
SERVICE section of this manual can help.
DO NOT start machine until all preceding
setup instructions have been performed.
Operating an improperly set up machine
may result in malfunction or unexpect-
ed results that can lead to serious injury,
death, or machine/property damage.
Serious injury or death can result from
using this machine BEFORE understanding
its controls and related safety information.
DO NOT operate, or allow others to operate,
machine until the information is understood.
To test run machine:
1. Clear all setup tools away from machine.
2. Twist Emergency Stop button clockwise until
it springs out (see
Figure 16). This resets the
switch so the machine can start.
The test run consists of verifying the following:
1) the motor powers up and runs correctly, 2) the
E-Stop button safety feature works correctly, and
3) the power feed controls work correctly.