Model G0836 (Mfd. Since 09/17)
-17-
Figure 10. G0836 mounted on optional T28099
stand.
Lifting & Placing
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Bench Mounting
Figure 12. "Direct Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Another option is a "direct mount" (see example
below) where the machine is secured directly to
the workbench with lag screws and washers.
The base of this machine has mounting holes
that allow it to be fastened to a workbench or
other mounting surface to prevent it from moving
during operation and causing accidental injury or
damage.
The strongest mounting option is a "Through
Mount" (see example below) where holes are
drilled all the way through the workbench—and
hex bolts, washers, and hex nuts are used to
secure the machine in place.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure 11. "Through Mount" setup.
Number of Mounting Holes ............................ 4
Dia. of Mounting Hardware Needed ..........
5
⁄
16
"
To lift and place machine into position:
1. Move shipping crate next to workbench or
stand, then unbolt machine from pallet.
2. Move machine work table as close to column
as possible, and raise headstock to its high-
est position. This will help balance machine
when lifting and moving.
3. Tighten Z-axis and X/Y-axis table locks (see
Page 26) to avoid sudden shifts when lifting.
4. Position a lifting sling under headstock.
Connect sling ends to a forklift, then place
machine on workbench.
5. Secure machine to workbench following
instructions in
Bench Mounting, or mount to
optional T28099 stand (see
Figure 10).
Содержание G0836
Страница 60: ......