-58-
Model G0795Z (Mfd. Since 06/17)
Labels & Cosmetics
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
701
P0795Z701
DISCONNECT POWER LABEL
706
P0795Z706
TOUCH-UP PAINT, GRIZZLY GREEN
702
P0795Z702
GRIZZLY NAMEPLATE-MINI
707
P0795Z707
GRIZZLY.COM LABEL
703
P0795Z703
TOUCH-UP PAINT, GREY PUTTY
708
P0795Z708
HEADSTOCK FACE LABEL
704
P0795Z704
GENERAL WARNING LABEL
709
P0795Z709
CONTROL PANEL LABEL
705
P0795Z705
HANGING TAG
grizzly.com
Motor: 2 HP, 220V, Single-Phase, 60 Hz
Full-Load Current Rating: 7.3A
Motor Speed: 3500 RPM
Max. Distance Spindle to Column: 7"
Max. Distance Spindle to Table: 18-1/4"
Spindle Taper: R-8
Drawbar Thread Size: 7/16-20
Number of Spindle Speeds: Variable
Spindle Speed Range: 50–2300 RPM
Longitudinal Table Travel: 14-7/8"
Cross Table Travel: 9-1/4"
Drilling Capacity Cast Iron: 1-1/4"
Drilling Capacity Steel: 1-3/16"
End Milling Capacity: 5/8"
Face Milling Capacity: 2-1/2"
Weight: 408 lbs.
Specifications
Manufactured for Grizzly in China
Date
S/N
MODEL G0795Z
VARIABLE-SPEED
BENCHTOP MILL/DRILL
Power
Spindle RPM
Spindle Speed
Forward
Reverse
Drill
Tap
E-Stop
Stop
Off
1000
2300
50
950
L
H
RPM
L
H
G0795Z
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
Change spindle
speed or rotation
direction ONLY
when spindle is
completely
stopped.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
WARNING!
L
H
SPINDLE SPEED
L
70
3
2
1
0
in.
60
50
40
30
20
10
0
mm
50–1000 RPM
950–2300 RPM
H
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVEL BEFORE USING!
WARNING!
To reduce the risk of serious personal injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses AND a face shield.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up, adjusting, or servicing.
5. Tie back long hair, roll up sleeves, and DO NOT wear loose clothing,
gloves, or jewelry.
6. Properly set up machine before starting.
7. Always remove adjustment tools before starting.
8. Keep all guards and covers in place during operation.
9. Never use hands to hold/secure workpiece during operation—use
clamps or a vise.
10. Avoid positioning hands where they could slip into rotating bits.
11. Always use a brush or vacuum to remove metal chips; DO NOT use
your hands, rags, or compressed air.
12. Never attempt to slow or stop spindle with hands or tools.
13. Always use proper feeds and speeds for operation and workpiece.
14. Never leave machine running unattended.
15. DO NOT operate when tired or under influence of drugs or alcohol.
16. DO NOT expose to rain or use in wet locations.
17. Prevent unauthorized use by children or untrained users.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
701
702
703
704
705
706
707
708
709
Содержание G0795Z
Страница 64: ......
