Grizzly G0795Z, Руководство пользователя

Страница: 39 / 64

Model G0795Z (Mfd. Since 06/17)
-37-
Quill Rack & Pinion
Lube Type . Grizzly T26419 or NLGI#2 Equivalent
Lube Amount ........................................Thin Coat
Lubrication Frequency ......... 90 hrs. of Operation
Move the quill up and down to gain full access
to the quill rack-and-pinion (see
Figure 57), then
clean the teeth with mineral spirits, shop rags, and
a brush.
Headstock Elevation Leadscrew,
Column Nut & Bevel Gears
Lube Type . Grizzly T26419 or NLGI#2 Equivalent
Lube Amount ........................................Thin Coat
Lubrication Frequency ......... 90 hrs. of Operation
Tool Needed Qty
Hex Wrench 3mm .............................................. 1
Remove the rear cover of the column to access
the leadscrew, column nut, and bevel gears (see
Figure 56).
When dry, use a brush to apply a thin coat of
grease to the teeth, then raise/lower the quill sev-
eral times to evenly distribute the grease.
Note: Re-apply oil to the quill outside smooth
surface that may have been removed during the
cleaning process.
Figure 57. Quill rack-and-pinion.
Pinion
Rack
Use shop rags, a stiff brush, and mineral spirits to
clean away the grease and grime from the compo-
nents. When dry, apply a medium coat of grease
to threads of the leadscrew and bevel gears.
Move the headstock up and down a few times to
evenly distribute the lubricant along the leadscrew
and inside the column nut. Re-install rear cover.
Figure 56. Column rear cover removed to
access headstock elevation leadscrew, column
nut, and bevel gears.
Leadscrew
Bevel Gear
Crank
Bevel
Gear
Column
Nut
Headstock
Elevation
Leadscrew