Grizzly G0795Z, Руководство пользователя

Страница: 38 / 64

-36-
Model G0795Z (Mfd. Since 06/17)
Quill Outside Surface
Lube Type ..Grizzly T23962 or ISO 68 Equivalent
Lube Amount ........................................Thin Coat
Lubrication Frequency ........... 8 hrs. of Operation
Without disturbing the grease on the quill rack,
clean the outside smooth surface of the quill (see
Figure 53) with mineral spirits and shop rags.
Figure 53. Outside surface of quill.
Quill Outside
Surface
When dry, apply a thin coat of lubricant to the
smooth surface, then move the spindle up and
down to evenly distribute the oil.
Table Leadscrews
Lube Type ..Grizzly T23962 or ISO 68 Equivalent
Lube Amount ........................................Thin Coat
Lubrication Frequency ......... 40 hrs. of Operation
Tool Needed Qty
Hex Wrench 5mm .............................................. 1
Move the table as necessary to access the entire
length of the X- and Y-axis leadscrews (see
Figures 54–55). Remove the way cover from the
base to access the Y-axis leadscrew. Use mineral
spirits, shop rags, and a brush to clean them.
When dry, use a clean brush to apply a thin coat
of oil to the leadscrew threads, then move the
table through the X- and Y-axis paths to distribute
the oil.
Figure 54. Location of X-axis leadscrew.
X-Axis Leadscrew
Figure 55. Location of Y-axis leadscrew.
Y-Axis Leadscrew