Grizzly G0762, Руководство пользователя

Страница: 20 / 60

-18-
Model G0762 (Mfd. Since 5/14)
Assembly
Assembly of the Model G0762 consists of attach-
ing the power feed to the table and installing the
handwheels.
To assemble machine:
1. Position power feed assembly on left side of
table so that pins shown in
Figure 14 fit into
holes on top of table.
Figure 14. Power feed assembly attached to
table.
Cap Screws
Pins
2. Secure power feed assembly to table with (2)
M8-1.25 x 20 cap screws (see Figure 14).
3. Slide compression spring onto right end of
X-axis leadscrew, as shown in
Figure 15.
This will keep handwheel disengaged when
using power feed.
Figure 15. Compression spring installed on right
side of X-axis leadscrew.
Compression
Spring
Right End of
X-Axis Leadscrew
4. Thread handwheel handles into handwheels.
5. Slide handwheels onto right end of X-axis
leadscrew and Y-axis leadscrew (see
Figure 16), then secure them with (2) M8-1.25
x 12 cap screws and (2) 8mm handwheel flat
washers.
Figure 16. Handwheel handles attached.
Y-Axis
Handwheel
X-Axis
Handwheel