Grizzly G0762, Руководство пользователя

Страница: 16 / 60

-14-
Model G0762 (Mfd. Since 5/14)
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Small Item Inventory (Figures 7–8) Qty
A. Handwheel Handles w/Screws ................... 2
B. T-Bolts M12-1.75 x 55 w/Washers & Nuts .. 2
C. Bottle for Oil ............................................... 1
D. Toolbox ....................................................... 1
E. Wrenches 17/19, 22/24mm ....................1 Ea
F. Hex Wrenches 2.5, 3, 4, 5, 10mm .........1 Ea
G. Drift Key ...................................................... 1
H. Drill Chuck w/Chuck Key B16, 1–13mm ..... 1
I. Spindle Sleeve R-8 x MT#3 ....................... 1
J. Drill Chuck Arbor R-8 x B16 ....................... 1
K. Spindle Sleeve MT#3 x MT#2 .................... 1
L. Handwheels ................................................ 2
M. Compression Spring (X-Axis Handwheel) .. 1
N. Cap Screws M8-1.25 x 12 (Handwheels) ... 2
O. Handwheel Flat Washers 8mm .................. 2
P. Power Feed Assembly (Not Shown) ........... 1
Q. Cap Screws M8-1.25 x 20
(Not Shown; Power Feed) .......................... 2
Figure 7. Small item inventory.
K
A
B
C
D
E
F
G
H
I
J
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Figure 8. Small item inventory.
L
M
N
O