Grizzly G0686, Руководство пользователя

Страница: 18 / 44

-16-
Model G0686 (Mfd. Since 01/15)
3. Fully unthread the jig set screw shown in
Figure 9, raise the bit carrier up from the jig
base, then tighten the height lock lever to
hold the bit carrier in place.
4. Apply a thin coat of light machine oil to the
positioning pin and between the pivot and jig
base for smooth rotation of the jig assembly
(see
Figure 10).
Figure 9. Jig set screw and height lock lever.
Set Screw
Jig Height
Lock Lever
Bit
Carrier
Figure 10. Aligning the jig positioning pin over
the mounting hole in the pivot base.
Positioning Pin
Pivot
Base
Jig
Base
Assembly
Tools Needed (Not Included) Qty
Hex Wrench 5mm .............................................. 1
To assemble the grinder:
1. Use the provided cap screw to install the
handle onto the handwheel, as shown in
Figure 7.
2. Remove the jig mounting hex bolt and flat
washer shown in
Figure 8 from the pivot
base.
Figure 7. Handle installed onto the handwheel.
Handle
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Figure 8. Jig mounting hex bolt and flat washer.
Pivot Base
Hex Bolt
& Flat Washer