Grizzly G0554, Руководство пользователя

Страница: 51 / 94

g0554 gear-head Floor lathe
-47-
Figure 80. headstock and gear box drain
locations.
headstock oil drain
gear Box oil drain
Ball fittings, shown in Figure 82, are responsible
for the majority of the machine lubrication. to
lubricate ball fittings, clean the outside of the ball
fitting, depress the ball with the tip of the oil can
nozzle and squirt a little oil inside the fitting.
To lubricate the following areas every day:
1. Wipe off the oil port before and after oiling to
keep out contaminants.
2. oil the areas daily shown by arrows in
Figure 82, with one to two shots of sAe 20W
non-detergent oil or equivalent. some areas
may require fewer or more shots depending
on use. these areas include:
• Cross slide
• Compound rest
• Carriage
• tailstock
• lead screw and Feed rod
• Cross Feed handwheel
Apron oil sight glass
Apron oil Fill
Apron oil drain
Figure 81. Apron lubrication locations.
Figure 82. Ball fitting locations.
Failure to follow lubrication guidelines will
lead to rapid deterioration of lathe compo-
nents.
NOTICE