Grizzly G0554 страница 11 Скачать руководство пользователя

Страница: 11 / 94

g0554 gear-head Floor lathe

-7-

Headstock controls

A. Gear change Levers: used for setting

spindle speed.

b. Feed/Lead Selector Lever: used for set-

ting up power feed or threading operations in
conjunction with threading charts.

c. Lead Screw/Feed Rod Direction Lever:

Moving  lever  up  moves  carriage  toward
tailstock  —moving  lever  down  moves  car-
riage toward headstock when chuck is spin-
ning.  do  not  change  lever  position  while
machine is running.

D. Feed/Lead Selection Knob: used for set-

ting up power feed or threading operations in
conjunction with threading charts.

E. Feed Rod Lock Knob: With the knob in

the six o'clock position, the

Feed/Lead

Selection Knob can be adjusted. With the
knob in the twelve o'clock position, the

Feed/

Lead Selection Knob is locked in position.

F. Feed/Lead Selector Lever: used for set-

ting up power feed or threading operations in
conjunction with threading charts.

G. carriage Micro Stop: used for fine adjust-

ments for repeatable carriage stops.
graduated to 0.001". not to Be used
With poWer Feed!

H. Emergency Stop button: stops all machine

functions. twist to reset.

i. Jog button: turns all lathe functions

while being pressed.

J. power Light: indicates the lathe is energized

when illuminated. Controlled by the master
power switch on the back of the cabinet.

K. coolant pump Switch: turns coolant pump

ON.

L. Speed chart: shows lever combinations for

spindle rpMs.

M. Threading chart: shows lever and knob

combinations for feed and threading opera-
tions.

Figure 2. Control panel close-up.

Содержание G0554































































































Результаты поиска

Содержание G0554

Отзывы:

Похожие инструкции для G0554

Бренды по названию

Популярные бренды

Grizzly G0554, Руководство пользователя

Результаты поиска

Содержание G0554

Отзывы:

Похожие инструкции для G0554

Бренды по названию

Популярные бренды