Grizzly G0554, Руководство пользователя

Страница: 19 / 94

g0554 gear-head Floor lathe
-15-
inventory
After all the parts have been removed from the
two boxes, you should have the following items:
Main crate: (Figures 5 & 6) Qty
A. Model g0554 gear head lathe ................. 1
b. 12" Faceplate ............................................. 1
Figure 5. Main inventory.
Large Wooden box: (Figure 6) Qty
c. 8" Four Jaw Chuck ..................................... 1
D. Four Jaw Chuck Key .................................. 1
E. Camlock studs ........................................... 3
F. Camlock stud set screws .......................... 3
Small Wooden box: (Figure 6) Qty
G. Cast iron Foot pads ................................... 6
in the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Figure 7. tool Box inventory.
A
B
C
d
e
F
g
h
i
J
K
l
M
n
o
p
Q
r
s
t
u
NOTICE
Some hardware/fasteners on the inventory
list may arrive pre-installed on the machine.
check these locations before assuming that
any items from the inventory list are miss-
ing.
Tool box: (Figure 7) Qty
H. tool Box ..................................................... 1
i. touch-up paint ........................................... 1
J. oil Can ....................................................... 1
K. slotted screwdriver .................................... 1
L. phillips head screwdriver #2 ..................... 1
M. handwheel handles ................................... 2
N. open end Wrenches 9/11, 10/12, 12/14,
17/14mm ........................................... 1 each
O. hex Wrenches 2.5, 3, 4, 5, 6, & 8mm ..........
.......................................................... 1 each
p. Mt#5-3 tapered sleeve ............................ 1
Q. Mt#3 dead Centers ................................... 2
R. Change gears
30t, 35t, 32t, 40t (2) ...................... 1 each
S. tool post Wrench ....................................... 1
T. 3-Jaw Chuck Key ....................................... 1
u. spindle lock Key ....................................... 1
Figure 6. Box inventory.