-32-
Model G0449/G0450 (Mfd. Since 8/13)
2. Remove the feed motor cover, loosen the
four button head cap screws (
Figure 38) that
secure the gear box to the motor bracket, and
remove the V-belt.
Figure 38. Lubricating gear box.
Drain Plug
Fill Plug
3. With the oil and gearbox warm, slide the
gearbox out, remove the fill plug (
Figure 38),
remove the drain plug
, drain the oil, and rein-
stall the drain plug.
4. Add new oil, reinstall the fill plug, then rein-
stall the gearbox, cover, and other compo-
nents removed in
Steps 1 & 2.
Table Lift Screws (Figure 39): Should be cleaned
with mineral spirits and painted with lithium grease
every six months. Then, move the table up or
down to spread the grease thoroughly over the
threads. Do not overlubricate.
Figure 40. Worm gear threads.
Figure 39. Table lift screws (table removed for
clarity).
Worm Gear: Paint a light coat of lithium grease on
the worm gear threads (
Figure 40) once a year.
Failure to routinely inspect your drum sander
for damage and wear could result in unsatis-
factory work results, premature component
or machinery failure, or operator injury. We
recommend you create a checklist for routine
inspection and maintenance. Remember to
always disconnect the drum sander from its
power source before attempting to inspect,
adjust, or repair this machine!
Содержание G0449
Страница 80: ......
