Grizzly Tools G1026, Инструкция по эксплуатации

Страница: 8 / 29

Hold Down ....
Instruction Manual...........................................1
............................................1 Body....................
DO NOT
The spindle moulder is a
SECTION 3: SET UP
Unpacking
Piece Inventory
Qty
Plywood 1:
Bag 1:
•
Cardboard 1:
• Miter Gauge Assembly ....................................1
• Handle.............................................................1
....................................................1
• ...................................................1
• Guide ..............................................................1
3mm Hex Wrench...........................................1
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier assem-
bly, or to identify missing parts, please refer to the
detailed illustrations at the end of the manual.
After all the parts have been removed from the
carton, you should have:
7
over-exert yourself
while unpacking or
moving your machine
– consider using power
equipment to move the
machine. Serious per-
sonal injury may occur
if safe moving methods
are not followed.
heavy machine.
•
4mm Hex Wrench...........................................1 •
5mm Hex Wrench...........................................1
•
8mm Hex Wrench...........................................1
•
•
•
Vertical Bar IV .................................................1
•
Special Wrench...............................................1 •
Vertical Bar I
Collet Nut........................................................1
•
Ruber Feet......................................................4
•