Grizzly Tools G1026, Инструкция по эксплуатации

Страница: 11 / 29

2
2
Most of your spindle moulder has been
assembled at the factory, but some parts must
be assembled or installed after delivery. We
have organized the assembly process into steps.
Please follow along in the order presented here.
Beginning Assembly
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
Some metal parts
may have sharp edges
on them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Disconnect power from
the machine when per-
forming any maintenance,
assembly or adjustments.
Failure to do this may
result in serious personal
injury.
10
To install the handwheel:
1. Insert the handwheel on the handwheel shaft
shown in
Figure
,
Figure . Location of handwheel shaft.
Handwheel
Handwheel
2. Tighten the handwheel knob against the
screw part of the handwheel shaft.
3.
notes the key on shaft m-
atching to handwheel concave.
To turn the handwheel loose the handwheel
knob, turn the handwheel to adjust spindle
hight to desired position. Then, tighten the
handwheel knob, to keep the exact spindle
hight as set, always tighten the handwheel
knob.
Handwheel Shaft