Griven GR0466, Инструкция по эксплуатации

Страница: 10 / 24

10 English
6.2 Adjusting light beam direction
A. Untighten the screws "6" and the grain “7” .
B. Rotate the body of the unit towards desired direction
and tighten the screws “6” and the grain “7” .
6.3 Connection to mains power
The unit can operate with voltage from 200 to 220Vac or 230 to 240Vac and with frequency of 50 and 60Hz.
A. Untighten the screws “8” ed open the projector.
6
7
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• The unit must never be installed if not grounded electrically.
• It is suggested to use a magnetothermic switch along the power supply line, as prescribed by in force rules.
• The unit must not be powered up through a dimmer power device.
• Wiring and connection actions are to be performed by a qualified staff.
8
8