Griven GR0466, Инструкция по эксплуатации

Страница: 21 / 24

English 21
10.3 AUTOMATIC configuration
To set up the unit as AUTOMATIC the same instructions for the set up as MASTER must be followed (see paragraph
8.1 MASTER configuration). Adjust the dip-switch Master to ON and choose the programme to be executed.
To ensure maximum functionality and light output it is recommended to follow these instructions:
11.1 Cleaning the unit
The unit must be cleaned regularly. Cleaning regularity will depend especially on the environment where the unit
will operate: deposits of dust, smokes or other wastes will reduce the light output performances.
• Clean regularly the glass and the mirror of the unit.
• Be careful when cleaning the components. Operate in a clean, properly illuminated environment.
• Do not use solvents which could damage painted surfaces.
• Remove left particles by a cotton towel dampened with a glass-cleaning liquid or distilled water.
• Dry out by a clean, soft, non-scratching towel or by compressed air.
11.2 Regular checks
• Check electrical connections, especially the ground wiring and the power supply cable.
• Check that the unit is not damaged mechanically. Replace those components which have got deteriorated.
• Replace the lenses, the mirrors and the dichroic filters if they are visibly damaged.
• Replace any lamp that may present any damage or deformation.We recommend, therefore, that the lamp be
replaced within the manufacturer’s specified lamp life.
Replace any damaged shield.
11.0 Maintenance
Attention!
Always remove mains power prior to opening up the fixture.