Griven GR0466, Инструкция по эксплуатации

Страница: 19 / 24

English 19
Each unit will use 1 DMX channel.
The number of the DMX address is to be calculated by summing the values corresponding to the activated dip-
switches, which are written in the upper side of the dip-switch set (1, 2, 4, 8, 16, etc.).
9.3 DMX functions
Gobostorm can operate without DMX signal (in AUTOMATIC mode) and can be set so that a single MASTER unit
will command a series of SLAVE units. This function is particularly useful when more units are desired to execute the
same programme in synchrony.
The following picture shows an example of a Master-Slave layout.
Example
Unit with address 005
(dip-switch n°1 and 3= ON)
1 2 3 4 5 6 7 8 9 10 11 12
1 2 4 8 16 32 64 12
8
25
6
M
a
st
e
r
Canale Funzione Valore Descrizione
1
Gobo
rotation
0-31 Stop
32-55 Clockwise rotation speed 1
56-79 Clockwise rotation speed 2
80-103 Clockwise rotation speed 3
104-127 Clockwise rotation speed 4
128-151 Clockwise rotation speed 1
152-175 Clockwise rotation speed 2
176-199 Clockwise rotation speed 3
200-223 Clockwise rotation speed 4
224-255 Stop
10.0 Master-Slave and Automatic function
MASTER SLAVE 1 SLAVE N
IN OUT IN OUT
SLAVE 2
IN OUT
Terminal resistor
(R=120 ƺ not included!)