Griven CIRCUS 1200, Инструкция по эксплуатации

Страница: 7 / 12

Fixing
3 Ø 14.5mm holes are provided in the fork to
attach the lantern to a clamp or bracket.
Electrical connection
1) Fix the supply cable (2-fig.5) to the terminal block located on the rear part of the lantern (1-
fig.5)
2) Connect the lantern to a mains supply of 230V - 50/60Hz.
3) Ensure that the mains cable is connected to earth; the thermoswitch must have the following
electrical characteristics:
575 HMI lamp = rated for (In) 15A - sensitivity (Id) 0,03A
1200 HMI lamp = rated for (In) 20A - sensitivity (Id) 0,03A.
USE OF THE LANTERN
Control Panel
Position A
Position B
fig.3
fig.4
1 - Mains connector
2 - Fuse (10/20A)
3 - For connection to another CIR-
CUS
4 - 0-10V connecting socket
5 - Musical INPUT
6 - Microphone sensitivity adjust-
ment
7 - Microphone
8 - Fuse (3.25A)
fig.5