Grindmaster OPOD, Руководство пользователя

Страница: 7 / 16

Commercial / OCS Pod Brewer Page 7
User Operational Controls
Pourover Version:
Reservoir Lid (a):
Open and fill reservoir until water covers the holes of the removable filter
located under the reservoir lid. Do not overfill beyond the level of the holes.
Green LED Indicator (b):
Off =
Power is not applied to the machine.
Steady Green = Water tank is at operating temperature and ready to brew.
Flashing Green = Water heater is heating water tank. Brewer will not brew
during this time.
Yellow LED Indicator (c):
Continuous Off = Normal operation.
Flash On then Off after pressing brew switch =
Requires change out of
pod. If only hot water is being dispensed, open and close the brew chamber
between dispenses to begin dispensing hot water again.
Flash On and Off at 1 second interval (slow) =
Low water, refill reservoir
Continuous On = Overtemp condition (Call for service, do not operate machine)
Coffee Brew Switch (d):
Activates brewing sequence. A brewing sequence can be cancelled by
pressing the brew switch again.
Selector Switch (e):
Changes coffee brew strengths (light , medium , strong ) or selects tea cycle.
Brew Chamber “Close” Push Button (f):
Locks the brewing chamber. (With the tray in the closed position, push down
on the “Close” push button until the brew chamber “snaps” to the locked
position).
Brew Chamber “Open” Lever (g):
Lift up on lever to open the brew chamber then pull to access pod holder tray.
(f) Brew Chamber “Close” Pushbutton
(g) Brew Chamber “Open” Lever
(e) Selector Switch
(d) Coffee Brew Switch
(c) Yellow Change Pod LED Light
(b) Green Heating/Ready LED Light
(a) Reservoir Lid
WARNING
Scalding Burn Hazard!
Do not attempt to lift the ‘Brew Chamber “Open” Lever’ while
brewing: may cause serious scalding burn injuries.