Page 10
Model FDD2500
Prepare for Shipment
Important
: Always completely empty water tank and
PRODUCT HOPPERS
prior to shipping unit. (See Draining
the Tank and Cleaning the Hoppers section).
NEVER SHIP UNIT WITH PRODUCT IN HOPPER OR WATER IN TANK –
THIS WILL CAUSE IRREPARABLE DAMAGE.
Draining the Tank
Always empty the tank before shipping.
WARNING: Draining of the tank should be performed by a qualified service technician. The tank contains
7.5 gallons (28.4L) of very hot water. May cause severe burns.
1.
Prepare a heat resistant container to drain 7.5 gallons
(28.4L) of hot water from the tank into.
5.
Pinch hose with fingers and
remove the hose clamp
and plug.
2.
Disconnect power to machine.
6.
Allow the tank to drain
completely.
NOTE: It may be necessary to pinch
the hose and stop the water before
container is full. Carefully re-install
plug, then empty container. Repeat
steps 4-6 to completely drain tank.
3.
Remove the drain tray and front access panel.
7.
Once the tank is empty, securely
replace the plug and clamp on
the end of the hose. Reposition
the drain hose.
4.
Locate the silicone drain hose.
Put the end of the drain hose
into the container. Secure the
end of the drain hose (i.e. with
tape) into the container.
8.
Reassemble the front access panel and drain tray.
Содержание FDD2500-1-3A-B
Страница 20: ...Page 20 Model FDD2500 FDD2500 Hopper Assembly ...
Страница 32: ...Page 32 Model FDD2500 Wiring Schematic within Door for models FDD2500 1 M B FDD2500 3 M B ...
Страница 34: ...Page 34 Model FDD2500 ...
Страница 35: ...Model FDD2500 Page 35 ...
