Grifo MP AVR-51, Руководство пользователя

Страница: 64 / 78

grifo ®
ITALIAN TECHNOLOGY
Page 54 MP AVR-51 Rel. 3.10
DEVICE OPTIONS SUBMENU
Name Shortcut Function
Operation options All settings of this command are used for programming process
control. This is a flexible environment which contains items
associated with current device and programmer type. Items,
which are valid for the current device but aren’t supported by
current programmer are disabled. These settings are saved to
PG4U.SET file on the disk along with associated device by
QUIT\YES & SAVE command. List of items:
- group ADDRESS:
device start address (default 0)
device end address (default device size-1)
buffer start address (default 0)
- group INSERTION TEST:
insertion test (default DISABLE)
check ID bytes (default DISABLE)
- group COMMAND EXECUTION:
blank check before programming (default DISABLE)
erase before programming (default DISABLE)
verify after reading (default DISABLE)
verify after programming (ONCE, TWICE - default
ONCE)
verify options (nominal VCC
±
5%, nominal VCC
±
10%,
VCCmin
÷
VCCmax)
Serialization/Autoincrement The Autoincrement function enables to assign individual serial
numbers to each programmed device. This function simply
increments a serial number in the buffer each time a new device
is inserted into the programming socket. If a new device is
selected, the Autoincrement function is set to a default state i.e.
disabled. Take care of correct setting of autoincrement function
address for the sake of range error.
Associated file This command is used for file name edit associated with current
device. This is a file, which can be automatic loaded to buffer
after device is selected from default devices list or by start of
control program. You can edit the associated file name if the
automatic load of this file is enabled or disabled by
DEVICE\AUTOMATIC LOAD command. You can save both
settings i.e. associated file and enabling of automatic load of this
file to PG4U.SET file by command QUIT\YES & SAVE.
Special <Alt+S> Specific operations that may vary depending on the component
selected.