GRIDSTORE ADMINISTRATOR’S GUIDE 37
5.
In the GridProtect Protection Level area, select the number of Gridstore Storage Nodes that
can fail without data loss or disruption to the vStore.
Note:
The GridProtect level will vary depending on the total number of Gridstore Storage
Nodes and total capacity in the vStore. The maximum number of Gridstore Storage Nodes is
one less than half of the total number of Gridstore Storage Nodes participating in the vStore.
The greater number you choose, the greater the protection, but the less available capacity
you will have.
6.
Click the Next button.
The Confirmation page opens.
7.
Verify that the settings are correct and click the Next button.
The vStore is re-created with the selected Gridstore Storage Nodes.
8.
When finished, click the OK button.
The modified vStore displays in the left navigation tree in the
vStores area, as well as in
the vStores window to the right.
Removing a vStore
Before you can remove a vStore from the vPool, you need to
stop all I/O communications to the
(see pg. 29). You can do this first, or do this within the Remove vStore Wizard as part of the
steps below.
1.
In the left navigation tree of GridControl, navigate to the appropriate vStore. To do so:
•
Click the plus sign next to
vPools to expand it.
•
Click the plus sign next to the vPool that contains the appropriate vStore, to expand that
vPool.
•
Click the plus sign next to
vStores to expand it.
2.
Right-click on the appropriate vStore, and select Remove vStore from the short-cut menu.
Содержание GS-1000-2
Страница 1: ...Gridstore Administrator s guide ...
Страница 2: ......
Страница 66: ...GRIDSTORE ADMINISTRATOR S GUIDE 65 The Add Clients Wizard opens 2 Click the Next button ...
Страница 120: ...GRIDSTORE ADMINISTRATOR S GUIDE 119 A table of Gridstore Storage Node statistics displays to the right ...
