Page 6
SKU 65162
For technical questions, please call 1-800-444-3353.
This product contains or, when
15.
used, produces a chemical known
to the State of California to cause
cancer and birth defects or other
reproductive harm. (California Health
& Safety Code § 25249.5,
et seq.
)
When spills of fuel or oil occur, they
16.
must be cleaned up immediately.
Dispose of fluids and cleaning
materials as per any local, state,
or federal codes and regulations.
Store oil rags in a bottom-ventilated,
covered, metal container.
Keep hands and feet away from
17.
moving parts. Do not reach over or
across equipment while operating.
Before use, check for misalignment
18.
or binding of moving parts, breakage
of parts, and any other condition
that may affect the equipment’s
operation.
if damaged, have the
equipment serviced before use.
Many accidents are caused by poorly
maintained equipment.
Use the correct equipment for the
19.
application. Do not modify the
equipment and do not use the
equipment for a purpose for which it
is not intended.
Service PrecautionS
Before service, maintenance, or
1.
cleaning:
turn the engine switch to its
a.
“oFF” position.
allow the engine to completely cool.
b.
then, remove the spark plug
c.
wire(s) from the spark plug(s).
Keep all safety guards in place and
2.
in proper working order. Safety
guards include muffler, air cleaner,
mechanical guards, and heat shields,
among other guards.
do not alter or adjust any part of
3.
the equipment or its engine that
is sealed by the manufacturer
or distributor. Only a qualified
service technician may adjust
parts that may increase or
decrease governed engine speed.
Wear ANSI-approved safety goggles,
4.
heavy-duty work gloves, steel toe
work boots, dust mask/respirator and
hard hat during use and service.
Do not allow the hydraulic hose to
5.
come in contact with any hot part
of the unit. The hose might be
damaged, possibly causing it to burst
or leak under high pressure.
Maintain labels and nameplates
6.
on the equipment. These carry
important information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
Have the equipment serviced by a
7.
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
equipment is maintained. Do not
attempt any service or maintenance
procedures not explained in this
manual or any procedures that you
are uncertain about your ability to
perform safely or correctly.
Store equipment out of the reach of
8.
children.
Follow scheduled engine and
9.
equipment maintenance.
