2
IMPORTANT - PLEASE READ MANUAL BEFORE INSTALLATION
NOTICE
: Prior to installing, serious consideration must be taken to insure this filtration system will operate properly if
integrated to any other type of mechanical system, i.e. a forced air system, or an air handling unit. To insure proper operation
& compatibilities of both system, it is required that you follow the instructions in this manual.
LIMITATIONS:
The product is for residential applications only. Must be installed in accordance with all national and local
regulations, building and safety codes.
CAUTION
: TURN OFF ALL INTEGRAL DISCONNECTS BEFORE SERVICING
TO REDUCE OR AVOID THE HAZARDS OF ELECTRIC SHOCK AND FIRE:
CAUTIONS CONCERNING THE OPERATION AND FULL EFFICIENCY OF THIS PRODUCT:
• Before servicing or cleaning the system, always remove the
power cord from the AC wall outlet.
• To reduce the hazards of electric shock or fire, do not
perform any service to the system other than those stated
in the operating manual instructions.
• To reduce the risk of electric shock, this filtration system
comes equipped with a 3-prong plug-in. This plug will fit in a
polarized outlet only one way.
• Do not use filtration system for outdoor application.
• Do not pull or twist power cord when disconnecting it from
the ventilation system. Grasp the plug firmly, not the cord.
• Do not modify the power plug in any way; if modified, risk of
electric shock fire or even damage to the unit may occur.
• Do not use the filtration system for removal of flammable
fumes or gases.
• Use a dedicated AC 120V outlet only.
• Do not obstruct or cover the air intake or air outlet of the
filtration system.
• Do not modify, repair or disassemble this system. These
tasks are to be performed by authorized serviced personnel
only. Fire, electrical shock and/or bodily injury may occur if
these warnings are not followed.
• To prevent injuries, do not operate the filtration system,
while servicing or maintaining. There is an impeller wheel
turning at a very high speed that must fully stop rotating
prior to accessing the inside of the unit.
• Always assess the operation of the filtration system on how
it may interact with vented combustion equipment (ie. Gas
Furnace, Oil Furnace, Combustion, Appliances, etc.)
TABLE OF CONTENTS
1. Unpacking and inspection . . . . . . . . . . . 3
2. Technical data . . . . . . . . . . . . . . . . 3
3. Planning the installation . . . . . . . . . . . 4
4. Type of installation . . . . . . . . . . . . . . 4
5. Installing the unit . . . . . . . . . . . . . . . 5
6. General Operating Information . . . . . . . . 7
7. Contact Information . . . . . . . . . . . . . 8
