Greentec HL152- 242 Cutterbar
28
Cleaning
ATTENTION!
Danger of machine damage!
Some parts of the hedge trimmer can become very hot
during operation. Cleaning with cold water immediately
after use can result in damage and malfunctions in the
hydraulic, motor or control components.
►
Allow the hedge trimmer to cool before cleaning.
Regular cleaning and subsequent visual inspection will help to detect
and remedy damage and discrepancies early on.
►
Clean the hedge trimmer and carrier vehicle or implement carrier
after each use and then conduct a visual inspection.
You can use a pressure washer to clean the hedge trimmer.
►
Be careful not to damage any exposed seals and electrical
connections.
►
Maintain a sufficient distance.
►
Afterwards, dry the hedge trimmer with compressed air.
►
After cleaning and before storing the hedge trimmer, lubricate the
grease points in accordance with the information on the lubrication
sticker. Also observe the lubrication instructions of the manufacturer
of the carrier vehicle or implement carrier.
►
Clean and grease the connection to the carrier vehicle or implement
carrie
►
Rust-protection oil is applied to the hedge trimmer after washing
Conduct a visuel inspection
Operate the hedge trimmer only if it is in perfect working order.
►
Check the hedge trimmer for loose, damaged, missing and worn
parts to ensure operational safety.
►
Repair any damage and replace any missing parts before using or
continuing use of the machine.
Check tightening torques
►
Make sure all bolts and nuts on the hedge trimmer are tight. The
specified tightening torques can be found in chapter Required tools
and chapter Tightening torques see chapter
Torque spanner
Содержание HL 152
Страница 1: ...GreenTec HL152 242 Cutterbar 3 1 edition 2020...
Страница 2: ...Greentec HL152 242 Cutterbar 2...
Страница 46: ...Greentec HL152 242 Cutterbar 46 Bilag 1 Tightening torques...
Страница 47: ...Greentec HL152 242 Cutterbar 47...