GreenTec HL 152, Руководство пользователя

Страница: 27 / 47

Greentec HL152- 242 Cutterbar
27
Maintenance schedule
Period Maintenance tasks
10 minutes after
first start-up Tightening torques for
bolts and nuts X
as needed Hedge trimmer X
Sections X
Knives X
Guards X
Safety fingers X
Wear plates X
Knife head X
before each use Hedge trimmer X
every 50 hours Pro-drive knife drive X
Head bearing X
Tightening torques for
bolts and nuts X
Required tools
You will need the following tools for maintenance of the hedge trimmer:
►
Torque spanner
•
Tightening torque 115 Nm for bolts M12 x 40 (Pro-drive knife drive)
•
Tightening torque 115 Nm for bolts M12 x 30 (motor mount and Pro-
drive knife drive)
•
Tightening torque 48 Nm for nuts M10 (guard)
•
Tightening torque 15 Nm for bolts M6 x 22, M6 x 18 (knife connection)
and nuts M6 (sections)
•
Tightening torque 81 Nm for bolts M10 x 35 (head bearing)
•
Tightening torque > 72 Nm for bolt M10 x 45 (knife head lug)
►
Wrench set
►
Socket set can be motorised or air-powered
►
Open-end wrench set