GreenTec HL 152, Руководство пользователя

Страница: 40 / 47

Greentec HL152- 242 Cutterbar
40
►
Unscrew the bolts on the
head bearing.
►
Remove the knife head from
the sections. Watch out for
loose sections.
Dismantling the head bearing
►
Loosen the bolt on the knife
head.
►
Remove the head bearing
from the knife head. You can
spread the knife head
somewhat by inserting a small
screwdriver into the slot of the
knife head.
Installing the head bearing
►
Insert the head bearing in
the new knife head and align it
roughly. You can spread the
knife head somewhat by
inserting a small screwdriver
into the slot of the knife head.
►
Tighten the bolt hand-tight.