www.greenoks.com.tr
[EN]
10
The change will be activated by pressing the Arrow keys in this menu. The time value can be
entered from 0 to 99 minutes. Press ENT button to save. Press ESC button or wait to exit
without saving.
If any step cooking time 0 is entered when stepping operation is active, then the stepper and
subsequent steps are completely reset and cannot be used. Thus a program can be set to
1/2/3/4/5 stepper and can be used.
Set Steam Adjustment
:
When the system is in the ON position, SET STEAM BUTTON a is pressed to enter the set
change operation. The display shows STE + Step number.
If stepped operation is opened in the system, the step pad will be changed and the step
button can be pressed to switch to other steppes. The step number can be monitored from
both leds and display messages.
If stepped operation is not active, the LEDs will not light and the other steppers cannot be
accessed with the step button.
The change will be activated by pressing the Arrow keys in this menu. Steam Time value input
can be made from 0 to 99 minutes. Press ENT button to save. Press ESC button or wait to exit
without saving.
The time set here is the time when the steam is started. This steam will be given
automatically. This timing starts counting with the PLAY button with the cooking time, waits
with PAUSE and ends with TIMER STOP.
Parameter Menu:
When the system is off, this key can be pressed for 5 seconds. The keys will be released while
the Pr message is shown on the display. On the right display, the parameter number is
displayed on the left display. Use the arrow keys to move up to the desired parameter value.
Press the ENT key to select the parameter.
The desired setting is made with the arrow keys and saved with ENT. If no change will be
made, ESC will return to the previous parameter number selection menu. If no operation is
performed, the menu closes after 30 sec.
PARAMETERS
Parameter 0: P00:: Hysteresis: 1-5 degrees
Parameter 1: P01:: Steam Ready Temperature: 0-350 degree
Parameter 2: P02:: Manual Vapor Duration: 0-99 sec
Parameter 3: P03:: Automatic Steam Duration: 0-99 sec
Parameter 4: P04:: Fan Control: 0-1 type (0 unidirectional / double direction)
Parameter 5: P05:: Fan On Time: 0-999 sec
Parameter 6: P06:: Fan Off Time: 0-999 sec
Parameter 7: P07:: Oven Temperature Limit: 50-350 degrees
Parameter 8: P08:: Steped Operation Active: 0-1 type (0 stepper not present / 1)
Parameter 9: P09:: Overtemperature Indicator: 0-1 type (0 normal / 1 overvoltage)
Parameter 10: P10:: Heating Type Selection: 0-1 type (0 normal / 1 Israeli type)
Parameter 11: P11:: Plus Hysteresis: 1-10 degrees
Parameter 12: P12: Resistor On Time: 0-240 sec
Parameter 13: P13:: Resistance Off Time: 0-240 sec
Parameter 14: P14:: Temp Down Display: 0-1 type (0 normal / 1 temperature drop display)
Parameter 15: P15: Temp Down Degree: 0-30 degree
Parameter 16: P16:: Service Operation Active: 0-1 type (0 does not service / 1)
Parameter 17: P17:: Service Process Done: 0-1 type (0 service not done / 1 service done)
Parameter 18: P18:: Service Time Duration: 0-9999 hours
Clock Setting:
To set the real time clock, press the TIME ADJ button while the system is off.
