Greenhouse People HE-BLE, Руководство по сборке

Страница: 38 / 40

38
FINAL FIXING
DOWNPIPE INSTALLATION
UU
VV
1. Firstly you need to decide whether you want the water in your gutters to drain to the front or
the rear of the greenhouse.
2. The gutter outlets and stop ends simply push into the gutters (Diagram UU & VV). For an
even better seal you could run a bead of silicone around the inside edge of the gutter before
inserting the outlet and stop end.
3. Now take the downpipe and slide on the bracket. Insert the downpipe into the outlet.
4. When you are happy with its position line up the bracket with the side corner bar, mark
through the screw hole and with a 3.2mm drill make a pilot hole. Using the self tapping screw
fix the bracket to the corner bar (Diagram WW).
5. Finally push the 45 degree pipe (593) onto the end of the downpipe to direct the flow of water.
6. Repeat on the opposite corner.
462
591
590
462
430
430
WW
590
592
594
430
Part Name Part Length Qty
No. mm Required
Screws, self tapping - 19mm M3.5 583 19 2
Gutter outlet 590 70 2
Gutter stop end 591 26 2
Downpipe 592 1500 2
45 degree double collar 593 - 2
Downpipe bracket 594 - 2