Green Valley LiGrip, Руководство пользователя

Страница: 13 / 19

New Project
2.Modify parameters: in the project settings, output, change the minimum distance filter to 1.5, and the voxel filter
size to 0 or uncheck the box, click OK to save the changes.
Parameter Configuration
Note:
(1) Voxel filtering: If you keep the default, the density of the point cloud after the solution is relatively
sparse, about 3000-5000 points/square meter. Therefore, set the value to 0, or uncheck the box, to
achieve point cloud density above 10000 points/square meter;
(2) Distance filtering: The setting can be adjusted according to the height of the field collector to the ground
when holding the device, and the shadow can be filtered out directly
3.Point cloud calculation: Under the processing column, click "Start" to directly perform point cloud calculation.