Green Valley LiGrip, Руководство пользователя

Страница: 15 / 19

5.FAQ
Why does the system not power on?
Please check:
(1) Whether the battery power is sufficient;
(2) Whether the battery connection cable is connected.
Be careful not to regularly over-discharge the battery to avoid damage to the battery.
It is recommended to stop the collection operation when the power is below 30%, replace the battery or fully
charge the battery. Also ensure that the power cable is disconnected when the device is turned off.
How long is does the LiGrip work on one battery cycle?
A fully charged battery can support up to 4 hours of uninterrupted data collection.
What safety precautions should i be aware of when using the LiGrip?
LiGrip devices have an IP65 IEC rating, meaning the LiGrip offers protection provided by mechanical casings and
electrical enclosures against intrusion, dust, accidental contact, and water. Thus, the system is safe to operate in
most day-to-day environments.
Is the laser used by the LiGrip system safe?
The lasers used in LiGrip have a safety class of 1: Safe for the human eye.
Is the data collected by LiGrip kept private to me?
All data collected by LiGrip is only stored in the device internally and is not uploaded to any network. The
scanned data is only copied through the network cable, and can be deleted at any time after copying.