Green Valley LiGrip, Руководство пользователя

Страница: 10 / 19

(2) Collection speed whilst walking should not exceed 1m/s, and the normal driving speed is sufficient, and
should not be too fast
(3) When collecting indoor scenes, open the door to pass through in advance, and do not move the door
during the collection process
(4) Pay attention planning the route of collection in advance when collecting, and try to use a closed loop
where conditions permit.
5.Stop collection: After the data collection is completed, hold the device firmly in place, press the green wave
button, and then it will start to flash. After about 15s, the flashing is completed, and the green light is off, which
means that the data collection has stopped. At this time, you can hold the device freely.
6.Power off the device: If you still need to continue to collect data, start directly from the device initialization in
step 3; if the data collection is completed, directly turn off the battery, and the specific operation is the same as
turning on the battery.