Green Valley LiGrip, Руководство пользователя

Страница: 9 / 19

1.Power on the device: Press the round button above the battery and release it, then continue to hold the button
for 2 seconds, wait for the green indicator on the button and the battery indicator to light up, which means that the
battery starts to work and the device is on Electricity.
Power up the device/p>
2.After the device is powered on, the green wave button on the back cover of the main unit will be always on, and
the button will turn off after about 40s.
3.Device initialization: Select an open starting position, keep the device still (it can be placed flat or held
normally), press the green wave button, the button will flash first, and the device will rotate one and a half times,
waiting for about 20s After that, the green wave button is always on, and the device rotates stably, that is, the
device starts to work normally;
At this time, you need to keep the device in place, let the device stand for about 25s, wait for the device to
initialize, and build the base map.
Note: The laser should not be aimed at the wall or the ground, try to aim at an open place
4.Data collection: After the stationary is completed, if the device is placed horizontally, slowly pick up the device
and walk directly according to the route planned in advance. During walking, do not make large movements of the
arm holding the device. You can move slowly or change hands.
Note
：
(1) Equipment collection should not exceed 15 minutes