Green Valley LiBackpack C50, Руководство пользователя

Страница: 18 / 52

Unplug the USB drive
2.Data cable transmission: When the device is turned on, connect one end of the network cable to the device and the other end to the
computer, and set the computer "IP address: 192.168.1.99, subnet mask: 255.255.255.0" ,Enter the URL "\\192.168.1.200" at the computer
network, enter the internal storage space of the device, open the "share" folder, and select the collected .ply files, .bag files according to the
collection time, copy it to the computer, and then complete the data export.
Data Export
The first time you enter the "share" folder, you will generally be prompted to enter the user name and password: "User name: share,
password: 111111"
5.5.2 Export Imagery Data
1.Copy CollectionRecords.txt with .bag file, and it records the corresponding camera file name to .bag.
2.When transferring camera data, make sure that camera is on. Use a USB cable to connect the camera to the computer, and copy camera
file. To leave the Lidar on/off would not affect imagery data export.
Note:
The data format recorded in CollectionRecords.txt is .mp4. And there is no need to consider the difference of the suffix name when
copying the video corresponding to the .bag file
Recording 4k video and you will get a .mp4 or .insv file, while recording 5.7k video and you will get two .mp4 or .insv file.
Make sure to the disk space is large enough for the data file.
Please free up camera storage space from time to time in case the data is too large and cause insufficient storage available.
Please always check the memory card usage.