Green Valley LiBackpack C50, Руководство пользователя

Страница: 43 / 52

Can I align multiple point cloud datasets or georeference them?
It is recommended that specialized referencing targets are used as control points to align multiple point cloud datasets or to georeference a
single point cloud during post processing. Referencing targets should be placed over datum monuments when the goal is to use them to
georeference LiBackpack point clouds. LiDAR360 has a Manual Registration (Rectify) Tool which allows users to complete scan-to-scan
alignments and/or georeferencing processes. When target spheres are not available, you can align multiple point clouds with LiDAR360’s
Manual Registration (Rectify) Tool by using pairs of co-located points found in overlapping regions of the to-be-aligned point clouds.
How long can I scan with LiBackpack on one battery charge?
LiBackpack can operate for 2 hours with one fully charged DJI TB47S Intelligent Flight battery.
What are the recommended operation environment and conditions?
Operation of the system should be carried out when ambient temperatures are within the −10° to 60°C range. The Velodyne sensor has a
rating of IP67. You should avoid operating the LiBackpack outdoors on wet-weather conditions.
What is the ANSI Laser Safety Standard rating of LiBackpack’s LiDAR sensor?
ANSI Laser Safety Standard rating of LiBackpack is Class-1 (eye-safe).
Is my data collected with LiBackpack secure?
All data collected with the LiBackpack system is securely stored local on the system drive and not uploaded to any network. The data can
later be transferred out to USB devices or deleted from the UI. If you encounter any difficulties with real-time data processing, please contact
us at info@lidar360.com and send us the data with its documentations. We will post-process your data to produce high accuracy point cloud.
How long does LiBackpack’s on-board data processing take to complete?
Data processing is performed by LiBackpack firmware in nearly real-time. However, data processing may take longer to complete in situations
where there the scanning environment is spatially complex (contains many geometrically unique features), or there are large numbers of
survey loops to close. Data processing should not take longer than 3 to 5 minutes to complete after pressing the Stop button for a scanning
session no longer than 30 minutes.
What should I do if the flash drive is not detected after powering on the system?
Power off the system. Unplug the USB drive from the system, and plug it in again after powering on the system.
When can I unplug the flash drive?