
www.GreenSeriesFitness.com
©April 2017
all Toll free at 800-269-7130
CIR-TM8000-G Revision 1.2
70
John C. Jensen
CARE & MAINTENANCE
U
CARE & MAINTENANCE
Always remove the key and unplug the power cord before cleaning, lubricating, or performing any maintenance.
Other parts maintenance:
CARE & MAINTENANCE
Always remove the key and unplug the power cord before cleaning, lubricating, or performing any maintenance.
HOW DO I CLEAN MY MACHINE?
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your treadmill and its
operating environment will keep maintenance problems and service calls to a minimum. For this reason, Customer Tech
Support recommends that the following preventive maintenance schedule be followed.
DAILY
•
Unplug the treadmill. Clean entire machine using water and a mild soap or other Green Series Fitness approved solution
(cleaning agents should be alcohol and ammonia free).
MONTHLY or QUARTERLY (depending on usage or dirty environments)
•
Unplug the treadmill and remove the motor cover. Check for debris and clean with a dry cloth and small vacuum nozzle.
DO NOT
vacuum directly on electronics board. Either blow with mouth or compressed air to clean electronic components.
WARNING
: Do not plug the treadmill in until the motor cover has been reinstalled.
RECOMMENDED CLEANING TIPS
Preventative maintenance and daily cleaning will prolong the life and look of your equipment.
A
Use a soft, clean cotton cloth.
DO NOT
use paper towels to clean surfaces on the treadmill. Paper towels are abrasive
and can damage surfaces.
B Use a mild soap and damp cloth.
DO NOT
use ammonia based cleaner or alcohol. This will cause discoloring of the
aluminum and plastics it comes into contact with.
C Do not pour water or cleaning solutions on any surface. This could cause electrocution.
Number
Checking Item
Daily
Week
Month
Season
6 Months
1
Console Screws
Checking
2
Frame
Wipe
Checking
3
Running Surface
Clean(dust)
Checking
4
Power Code
Checking
5
Overlay
Wipe
Checking
6
Handle bar
Wipe
Checking
7
Handle bar screws
Checking
8
Front Roller & Groove
Wipe
Checking
9
Rear Roller
Checking
10
Safety Key
Wipe
11
Drive Belt
Wipe
Checking
12
Running belt tension
Checking
13
Motor Control
Clean(dust)
14
Motor Pulley & Groove
Checking