background image

11 — 

English

FUEL CAP

WARNING:

Check for fuel leaks. A leaking fuel cap is a fire hazard and 
must be replaced immediately. If you find any leaks, cor-
rect the problem before using the product. Failure to do so 
could result in a fire that could cause serious personal injury.

The fuel cap contains a non-serviceable filter and a check 
valve. A clogged fuel filter will cause poor engine perfor-
mance. If performance improves when the fuel cap is loos-
ened, check valve may be faulty or filter clogged.  Replace 
fuel cap if required.

IDLE SPEED ADJUSTMENT

See Figure 17.

WARNING: 

The cutting head will move when adjusting the idle speed. 
Wear all protective clothing and keep all bystanders, 
children, and pets at least 50 ft. away. Make adjustments 
with the unit supported by hand so that the cutting head 
does not contact the ground or any object. Keep all parts 
of your body away from the cutting head and muffler. 
Failure to follow these instructions could result in serious 
personal injury.

If the cutting attachment turns at idle, the idle speed screw 
needs adjusting on the engine. Turn the idle speed screw 
counterclockwise to reduce the idle RPM and stop the cut-
ting attachment movement. If the cutting attachment still 
moves at idle speed, contact a service dealer for adjustment 
and discontinue use until the repair is made.

WARNING: 

The cutting attachment should never turn at idle. Turn 
the idle speed screw counterclockwise to reduce the 
idle RPM and stop the cutting attachment, or contact a 
service dealer for adjustment and discontinue use until 
the repair is made. Serious personal injury could result 
from the cutting attachment turning at idle. 

SPARK PLUG 

This engine uses a Champion RCJ6Y or equivalent spark 
plug with .025 in. electrode gap. Use an exact replacement 
and replace annually, or more frequently if necessary.

STORING THE PRODUCT

  Clean all foreign material from the product. Store idle unit 

indoors in a dry, well-ventilated area that is inaccessible 
to children. Keep away from corrosive agents such as 
garden chemicals and de-icing salts.

  Abide by all ISO and local regulations for the safe storage 

and handling of gasoline. 

When storing 1 month or longer:

  Drain all fuel from tank into a container approved for 

gasoline. Run engine until it stops.

HIGH ALTITUDE ENGINE OPERATION

Please have an authorized service center adjust this engine 
if it is to be run above 2000 feet. Failure to do so may result 
in poor engine performance and increased emissions. An 
engine adjusted for high altitudes can not be run at 2000 
feet or lower. In doing so, the engine will overheat and cause 
serious engine damage. Please have an authorized service 
center restore high altitude modified engines to the original 
factory specification before operating below 2000 feet.

MAINTENANCE

Содержание 26CS GM22000





















































Отзывы: