10
The Setup Menu
Program In:
This section allows you to set parameters for the Program Audio
Channel Assignment:
You have 32 channels available. Here you can assign Groups and Users to those channels.
Audio Settings:
Here you can set the Audio options for your microphone.
Options:
You will find general options here
Set User:
This is the place to choose which User profile to use for your beltpack
Clone Config:
Clone a Configuration File from another Green Go device or load the Factory Default
Connection:
Settings related to your connection and the place to go for paring your beltpack to an antenna
Device Options:
Options specifically for your device’s UI settings and warnings
Info:
Information about your beltpack and where you can choose to reset your beltpack settings.
The following will introduce you to the Setup menu.
Where to find what you are looking for and a complete list of the Setup Menu with notations.
The Sections
The Setup Menu Tree:
Exit //Leave menu
Program IN
Exit //Go back
Src:___
Select Program Audiosource: external audio source - Program audio - Mixer out etc.
Vol: Default: 0dB - Range:+12dB - -36dB - and MUTE//Volume of Program Audio
Dim: Default: -6dB - Range: 0 - -24dB and MUTE //Program audio volume dimming during communication
Channel Assignment
Exit//Go
back
1 - 32//Select channel to assign User or Group to.
Exit
//Go
back
ID: 258//ID of User or Group assigned to the channel
Exit
//Go
Back
Group//Assign
Group
to
channel
User//Assign
User
to
channel
None//Remove assignee from to channel
Set Label//Set different label for channel
Cancel//Go
Back
Group//Select
a
group
label
User//select
a
user
label
Clear//Clear
the
label
set
Talk: Latch/Momentary//Set the way the Talk button acts when pressed
Latch/Momentary //Short press: Latch - Long press: Momentary
Latch//A press on the Talk button enables talking - a second press disables talking
Momentary//If selected, the Talk button must be kept pressed to enable talking
Disabled//Disable Talking for this channel
Listen
On:
Listen On// Enable listening to this channel
Listen Off// Display will still indicate talking, but audio will be Off.
Volume: //Set the volume for this channel
Default 0dB - Range: Mute, -36dB to 12dB
Normal Priority//Set the priority level of the channel. Also see ’Options/Priority dim.
High Priority, Normal Priority, Low Priority
Call Send Enabled//Enables or disables the ability to send calls to the channel.
Call Send Enabled/Call Send Disabled
Call Receive Enabled//Enables or disables the ability to receive calls from the channel
Call Receive Enabled/Call Receive Disabled
An: Assign Group to be handled as Announce Channel. See Priority and Announce
Em: Assign Group to be handled as Emergency Channel. See Priority and Emergency
...continues
Green Go Wireless Beltpack
model nr. GGO-WBPX
User guide
