page 8 of 20
Copyright © 2020 Green-GO
MCXD user guiDe
GO
Listen /Listen Mode
When Listen is selected, which is done by either pressing on it on the TFT Touchscreen or by using the associated Listen/Call
toggle pushbutton, it is possible to Mute/Un-mute and adjust the individual channel volume. See above: ’Adjust the Volume
and Mute’
Call /Call Mode
A Call sends a visual signal to a selected Channel. (Group/User)
– The Group/User can choose to Answer the Call.
– When Call is selected, which is done by either pressing on it on the TFT Touchscreen or by using the associ-
ated Listen/Call toggle pushbutton, it is possible to make a Call by shortly pressing the Channel No./Name on
the TFT touchscreen. Alternatively the Talk button can be used as well if the Channel Pushbutton has been set
to Talk/Call/Cue in the menu under Setup Menu/Device Options/ChnBtn.
– A long press will cause an Alert to be sent.
Cue /Cue Mode
Two different cues can be sent. An Attention cue indicating that a Go cue is coming and the actual Go cue. The Deskstation
can be set in Cue Mode by selecting it on the TFT touchscreen or the associated Pushbutton. This enables the user to send
an Attention Cue followed by a Go cue or to skip the Attention cue and send a Direct Go Cue.
Sending an Attention Cue followed by a Go Cue:
– Select Cue Mode - The text changes from ’Cue Mode’ to ’Direct Go’
– press the Channel area on the TFT touch screen*
– The TFT Channel area will begin to flash yellow and a visual attention popup and an attention audio signal will
be sent to the recipient/recipients. The text will change from ’Direct Go’ to ’GO’
– If the recipient responds with an Acknowledgement, the TFT channel area will stop blinking and turn red. This
is called a Hold cue. At the recipients end the display will turn red.
– Pressing a second time on the Channel area* will send the GO Cue. The Channel area will turn Green for 5
secs and the text will change to ’Clear’. (Pressing again the Go cue will be cleared from the display immediately
instead.) A visual Go cue and a Go audio signal will be sent to the recipient.
Sending a Direct Go cue:
– Select Cue Mode - The text changes from ’Cue Mode’ to ’Direct Go’
– press and hold ’Direct Go’ and the Channel area on the TFT touch screen* - this will skip Attention and Hold
cues and go to directly sending a GO cue.
*Alternatively the Talk button can be used if the Channel Pushbutton has been set to Talk/Call/Cue in the menu
under Setup Menu/Device Options/ChnBtn.
Reset Multi Channel Deskstation to default settings
– Enter the Setup menu.
– Scroll to Info and click ’Enter’.
– Scroll to ’Reset All Settings’ and click ’Enter’.
– Click ’Yes Reset’ to confirm.
