Green-Go GGO-MCXD, Руководство пользователя

Страница: 15 / 20

page 15 of 20 Copyright © 2020 Green-GO
MCXD user guiDe
GO
– Audio Settings
– Exit//Go back
– Load Profile//Load an audio profile from the configuration file or choose the default.
– Exit//Go Back
– SideT: SideTone //Set the volume for how high the user should hear himself
– Default: 0dB Range: MUTE - 0dB
– Auto/AutoGain: //Set the dynamic amplification to avoid distortion
– Default: Medium Range: Slow - Off If set to ‘Off’ the MaxG, Max Gain, option is replaced with Gain –
a set fixed value.
– MaxG 50dB/ Gain 50dB: //Set the maximum gain/fixed gain of the input signal/microphone signal
– Default: 50dB Range: 60dB - 30dB
– Thld: Threshold //Set the level required for the input signal/microphone audio to be transmitted.
– Default: -35dB Range: -20dB - Off In ‘off’ setting, the microphone/input signal will transmit when
Talk is active If Threshold is set too high the input signal/microphone audio can become sporadic.
– Hold: //How long will a gate stay open after activity goes below the set threshold.
– Default: Fast Range: XLong - Fast
– Spkr Dim: Speaker dimming
– Default: Off
– Range: Off, -6Db, -12Db, -24Db
– In://Select audio input source
– Default: Headset
– Range: Line In, Front Mic, Headset, 14kHz, 12kHz, 8 kHz, 4 kHz, 3 kHz, 2,5 kHz, 2 kHz, 1,5 kHz,
1,25 kHz, 1 kHz, 875 Hz, 750 Hz, 625 Hz, 500 Hz, 375 Hz, 250 Hz, 125 Hz,
– Bias: //If an electret microphone is used Bias needs to be enabled to supply the power.
– Default: Off Range: On - Off
– Options
– Exit //Go Back
– Active Time: //Set the time in seconds, for a channel to be active after last audio activity.
– Default: 4.0s Range: 45.0s - 0.5 s
– Buzzer: //Enable or disable the buzzer sound that will sound if an alert is received.
– Default: Off Range: On - Off
– Tone: //Volume of audio signal used for Alert, Cue, Connection Status and Battery status.
– Default: -12dB Range: Max, -1dB - -48dB, MUTE
– No Listen on Talk: //Allow a Muted channel to be temporarily Un-muted after enabling Talk on the chan-
nel.
– Default: No Listen on Talk Range: No Listen on Talk- Listen on Talk
– Answer Enabled: // Enable or disable ability to Answer a call.
– Default: Answer Enabled Range: Answer Enabled - No answer
– Popup All: //Select Popup behavior
– Popup All //All popups are shown
– Popup Cue+Direct //Popups for Cue signals and direct Talk only
– Popup Cue //Popups for Cue signals only
– No Popup //(Yup, You guessed it)
– Priority Dim: //Dimming level of a lower priority channel if a higher priority channels becomes active
– Default: -6dB Range: 0dB - -24dB, MUTE
– Direct Priority: //Set the priority for direct channels
– Default: Normal Range: High - Low
– Direct Volume: //Set the volume for direct channels.
– Default: 12dB Range: 12dB - -36dB, MUTE
– Auto Talk: //Talk is automatically enabled on the selected channel