Green-Go GGO-MCXD, Руководство пользователя

Страница: 14 / 20

page 14 of 20 Copyright © 2020 Green-GO
MCXD user guiDe
GO
–
Connection:
Choose Normal operation, extensions setup, Remote connection and the settings.
– Clone Config: Clone a Configuration File from another Green-GO device or load the Factory Default
–
Device Options:
Options specifically for your device’s interface.
– Network: Choose between dynamic or manual network configuration
–
Info:
Information about your Deskstation and where you can choose to reset your Deskstation settings.
The Setup Menu Tree
– Exit //Leave menu
– Program Audio
– Exit //Go back
– Src: _ //Select group to use as Program Audio source
– Vol: Default: 0dB - Range:+12dB - -36dB - and MUTE //Volume of Program Audio
– Dim: Default: -6dB - Range: 0 - -24dB and MUTE //Program audio volume dimming during communica-
tion
– Channel Assignment
– Exit //Go back
– 1 – 32 //Select what User/Group to assign to channel
– Exit //Go back
– ID: 258 //ID of User or Group assigned to the channel
– Exit //Go Back
– Group //Assign Group to channel
– User //Assign User to channel
– None //Remove assignee from channel
– Set Label //Change channel label – Changed label indicated by a ‘ in front of label e.g. ‘Stage
– Cancel //Go Back
– Group //Select a group label
– User //select a user label
– Clear //Clear the label set
– Talk: Latch/Momentary //Set the way the Talk button acts when pressed
– Latch/Momentary //Short press: Latch - Long press: Momentary
– Latch //A press on the Talk button enables talking - a second press disables talking
– Momentary //If selected, the Talk button must be kept pressed to enable talking
– Disabled //Disable Talking for this channel
– Listen On:
– Listen On // Enable listening to this channel
– Listen Off// Display will still indicate talking, but audio will be Off.
– Volume: //Set the volume for this channel
– Default 0dB - Range: Mute , -36dB to 12dB
– Normal Priority//Set the priority level of the channel. Also see ’Options/Priority dim.
– High Priority, Normal Priority, Low Priority
– Call Send Enabled//Enables or disables the ability to send calls to the channel.
– Call Send Enabled/Call Send Disabled
– Call Receive Enabled//Enables or disables the ability to receive calls from the channel
– Call Receive Enabled/Call Receive Disabled
– Normal Bandwidth/ Enhanced bandwidth // If set to Enhanced, bandwidth increases during Talk
from 7 to 15 kHz. Data bandwidth usage doubles.
– An: Assign Group to be handled as Announce Channel. See Priority and Announce
– Em: Assign Group to be handled as Emergency Channel. See Priority and Emergency