Gree KFR-35GW/NaA512, Руководство пользователя

Страница: 63 / 68

N(1)
2
3
Fig.
Right side plate
Power cable
Power connecing cable
Front side plate
NOTE:
Wrong wiring connection will cause electrical malfunction.
Don't pull the wire which fixed well by the wire clamp.
Blue
Brown
Red
Yellow-green
Signal control wire
Wire hole
Ultra thin split unit series
Disassebmle the front side plate.
Assemble the front side plate.
Fix the wiring with wire clamp.
Outdoor unit wiring connection of dual split type unit
Cut off the tailings of wire hole on the right side plate, and wear the electric wire rubber loop.
Put the electric wire through to the cable-cross loop pass through the outdoor unit.
Connect the power cable to the terminal board with screw, make sure
that the wiring match with the wiring of indoor unit, and make sure
that the earth wire is reliably earthed.
For heat pump unit, connect the signal control cable (5X1.0) on the corresponding
terminal of outdoor unit.
Connect all the wirings fixed on the hook of right side plate, avoid the wirings
touch the compressor, as shown in Fig.11-9.
The earth list of earth terminal
Electric wire Earth terminal