Unitary Ducted Split AC
6
06
Tube Outlet Temperature of the Outdoor Unit
07
Discharge Air Temperature of the Outdoor Unit
08
Preset Frequency
09
Running Frequency
10
IPM Radiator or IPM Temperature
● This page can quit by pressing the “Enter/Hold” button,
● The accumulated “Compressor Runtime” can be cleared by pressing the “Mode” button for
five seconds.
Note: when the accumulated “Compressor Runtime” exceeds 1500 hours, a symbol on the main
page will be displayed to remind the user clearing the runtime.
4.5.2 “TIME”
After going into the “TIME” page, it is available to adjust the time.
● Switch to the time value in the order of DAY →HOUR →MINITE,
● Adjust the blinking value by pressing the “▼/▲” button,
● After the MINUTE is set, press the “Enter/Hold” button for confirmation to make this setting
come effective and back to the previous interface.
If the setting is canceled prior to the confirmation, then the related parameter will not be saved
and come into effect.
Fig.10
4.5.3 “TIMER”
It is capable of timing four periods for each day of one week,
For instance:
Table 3
No.
Period
Cooling Temperature
Heating Temperature
(Auxiliary Heating)
Period 1
06:00
24
℃
21
℃
Period 2
08:00
28
℃
17
℃
Period 3
18:00
24
℃
21
℃
Period 4
22:00
26
℃
17
℃
When the unit is currently under the cooling mode, the temperature will be set to
24
℃
automatically at 06:00, 28
℃
at 8:00, 24
℃
at 18:00 and 26
℃
at 22:00.
When the unit is currently under the heating or auxiliary heating mode, the temperature will be
set to 21
℃
automatically at 06:00, 17
℃
at 8:00, 24
℃
at 21:00 and 17
℃
at 22:00.
①
After going to this function page, the day (like, “SAT”) will blink and then adjust it through the
