２２
1.
Air conditioner is type
Ⅰ
electric appliance, thus please do conduct reliable earthing measure.
2.
3.
4.
① ② ③ ④
4
．
5.
2.
3.
Don't drag the power cable emphatically.
1.
♂
♂
Earth
（ ）
Notices for installation
Safety Requirements For Electric Appliances
The power supply should be used the rated voltage and AC exclusive circuit,
the power cable diameter should be satisfied.
Voltage applying range: the normal running range is rated voltage 220V 90%-110%.
It should be reliably earthed, and it should be connected to the special earth device,
the installation work should be operated by the professional.
The air switch must have the functions of magnetic tripping and heat tripping, in order
to protect the short circuit and overloading.
The min. distance from the unit and combustive surface is 1.5m.
Note:
In the family,the live wire,neutral wire in the power supply
socket that should be connected as the right figure, position
cannot be wrong connected, and should be reliably connected,
there should be not short circuit in the inside.
Wrong connection may cause fire.
Neutral wire (N)
Live wire(L)
Earthing requirements
The yellow-green two-color wire in air conditioner is earthing wire and cannot be used
for other purpose. It can not be cut off and be fixed by screw, otherwise it would cause
electric shock.
The earth resistance should accord to the National Criterion .
The user power must offer the reliable earthing terminal. Please don't connect the earthing
Tap water pipe
Gas pipe
Contamination pipe
Other places that professional
personnel consider them unreliable.
3. The appliance shall be installed in accordance with national wiring regulations.
4. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
5. Children should be supervised to ensure that they do not play with the appliance.
1.
2.
Others
The connection method of unit and power cable as well as the interconnect method
of each isolated component should refer to the circuit diagram stick on the unit.
The model of the blown fuse and rated value should refer to the silk-screen on the
controller or fuse sleeve.
6. Do not dispose this product as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
