Front side plate
2
６
3.
4.
5.
●
●
1.
2.
Install outdoor unit
Electric wiring
Disassemble the handle on the outdoor unit right
side plate.
Take off wire clamp. Connect and fix power connect
cord (for cooling and heating unit,connect and fix power
connect cord and signal control wire)to terminal of line
Fix the power connection cable with wire clamp,
(for cooling and heating unit, use the wire clamp
to fix the power connection cable and the signal
control wire), then connect the corresponding
Ensure wire has been fixed well.
Install the handle.
NOTE:
Wrong wiring may cause spare parts
malfunction.
After the cable fixed, make sure there
should be a free space between the connection
and connection and fixing place on the lead wire.
Handle
Power connection wire
Signal control wire
Power connection wire
Cool only type:
Heat pump type:
blue
black(brown)
yellow-green
violet
orange
blue
black
yellow-green
Signal control wire
Power connection wire
Power connection wire
GWCN24JDNK1A1A
GWHN24JDNK1A1A
blue
black
brown
yellow-green
violet
orange
yellow-green
blue
black
brown
connector.
bank. Wiring should fit that of indoor unit.
２
．
３
．
４
．
１
Remove the front side plate.
Take off wire clamp. Connect and fix power connect cord to
terminal of line bank. Wiring should fit that of indoor unit.
Fix the power connection cable with wire clamp, then
connect the corresponding connector.
Ensure wire has been fixed well.
5.
Install the
front side plate.
For GWCN24JDNK1A1A, GWHN24JDNK1A1A
For
GWCN09JANK1A1A
,
GWHN09JANK1A1A
,
GWCN12JBNK1A1A
,
GWHN12JBNK1A1A
:
．
GWCN18JCNK1A1A, GWHN18JCNK1A1A
