+PUVCNNCVKQP/CPWCN
,QVWDOODWLRQ0DQXDO
,PSRUWDQW1RWLFHV
Basic requirements for installation location
1. The unit installation work must be done by qualified personnel according to the local rulesand this manual.
2.When removing the unit to the other place, please firstly contact with the local maintenance center.
Installation at the following places may cause failure of the air conditioner. Please contact installation and service agency if
the installation at such places cannot be avoided.
Installation location of indoor unit
Choose a place far away from heat source, steam and inflammable gases.
A place with high frequency facilities, such as radio equipment, electric welder or medical equipment;
A region with saline-sodic soil near the sea;
A place full of machine oil;
A place with sulphide gases (such as sulphur spring);
An environment with special conditions.
1. Select a place, avoid the inflammable gas produce or leakage.
2. Select a place avoid the water vapor or oil sprayed on the unit .
3. Ensure that airflow can reach every conner of the room .
4. Choose a place so that the connection pipe could be easily pulled out.
5. Select the place where the airflow of the unit can not be blocked.
6. Select the position where the few outer air influenced.
7. Select the firm and flat ground.
8.Ensure sufficient clearance and space for service and maintenanc.
9. Ensure the installation of indoor unit is in conformity with the requirements of installation dimension drawing;
10.Do not use the unit in the immediate surroundings of a laundry a bath a shower or a swimming pool.
11.A location from which the condensation water can be drained out conveniently.
1. A place where noise and airflow generated by air exhaust do not affect the neighbors,animals and plants.
2.Ensure good ventilation of outdoor unit.
3.No obstacles near the outdoor unit obstructing the air intake and air exhaust of the unit.
4.The installation position shall be able to withstand the weight and vibration of the outdoor unit.
5. Choose a place far away the direct sunshine or strong wind.
6.The indoor unit shall be in conformity with the requirements of installation diagram,and ensure sufficient clearance
and space for service and maintenance.
7. The height of connection pipe should be within 20 meters, and the length of it should bewithin 30 meters.
8. Please select the place keep out of the children's reach.
9. Select the place which do not influence the communal path way and the appearanceof the city .
Installation location of outdoor unit