(WPEVKQPCPF%QPVTQN
Ĺ
Blow: when setting blow function, the icon and character will blink; when this function is selected, the icon and character will be
displayed. If the blow function hasn’t been selected, the icon and character won’t be displayed. During the time of blow, only the
icon and character are displayed, others won’t be displayed.
ĺ
E-HEATER: when setting E-HEATER function, the icon and character will blink; when this function is selected, the icon and
character will be displayed. If the E-HEATER function hasn’t been selected, the icon and character won’t be displayed.
Ļ
Timer: when setting timer function, the icon and character will blink; when this function is selected, the icon and character will be
displayed. If the timer function hasn’t been selected, the icon and character won’t be displayed.
ļ
AIR: when setting AIR function, the icon and character will blink; when this function is selected, the icon and character will be
displayed. If the AIR function hasn’t been selected, the icon and character won’t be displayed.
Ľ
Sleep: when setting AIR function, the icon and character will blink; when this function is selected, the icon and character will be
displayed. If the sleep function hasn’t been selected, the icon and character won’t be displayed.
ľ
Health: when setting AIR function, the icon and character will blink; when this function is selected, the icon and character will be
displayed. If the health function hasn’t been selected, the icon and character won’t be displayed.
Ŀ
Turbo: when setting turbo function, the character will blink; when this function is selected, the character will be displayed. If the
turbo function hasn’t been selected, the character won’t be displayed.
ŀ
Setting: when setting function, the character of setting will blink; when this function is selected, the character will be displayed and
the dual 8 will display the setting temperature. If the setting function hasn’t been selected, the character and setting temperature
won’t be displayed.
ྣ
Room temperature: when setting function, the character of room temperature will blink; when this function is selected, the
character will be displayed and the dual 8 will display the indoor room temperature. If the room temperature function hasn’t been
selected, the character and indoor room temperature won’t be displayed.
5. Indicator Control
When the unit is at standby status after energizing, the power LED will be bright. After the unit is turned on, the running LED will be
bright. When any one of the circumstances as below are occurred, the running LED will blink: defrosting, overcurrent protection, high
pressure protection of compressor, low pressure protection of compressor, high temperature protection of discharge pipe
ˈ
malfunction of
indoor tube temperature sensor, malfunction of discharge temperature sensor.
6. Light Control
LED display can be turned off by the light button on remote controller. When using remote controller to cancel “light”, the complete LED
displayer screen will go out, except the running LED. When turning off the light, if there’s signal from button or remote controller, LED will
go out after displaying for 5s.
