(WPEVKQPCPF%QPVTQN
1. ON/OFF button
Controller is turned on/off by pressing this button. After each pressing of this button, the on/off status will be switched for once.
2. Mode button
After pressing this button, it will be selected and displayed as below:
Auto cooling dry fan heating (heat pump type)
3. Ambient setting button
After pressing AMB. button, it will be selected as below:
SAVE mode room mode office mode restaurant mode common mode
ķ
In each mode, after pressing AMB. mode on control panel, the ambient mode can be selected and cycled as : SAVE mode---room
mode---office mode---restaurant mode---common mode; when the unit is turned on for the first time, ambient mode is default as
common mode; when restarting up the unit, ambient mode will keep the setting status before turning off the unit.
ĸ
When using the remote controller, the unit can only turn to SAVE mode or common mode after receiving the order from remote
controller, and the unit will run according to the order transmitted by remote controller all the time.
Ĺ
In SAVE mode, room mode, office mode or restaurant mode, sleep will be cancelled automatically and sleep can’t be adjusted;
Sleep is only valid in cooling, dry and heating mode under the common mode.
ĺ
Room, restaurant and office modes
Cooling and heating mode: setting temperature, fan speed and swing will run at the default status. If users have adjusted the
parameters, they will run according to adjusting status. 30mins later, it will turn back to auto adjusting status; when restating the
unit, swing will keep the status before turning off the unit.
Fan, dry and auto mode: running status is the same as that in common mode.
Ļ
SAVE
mode
In cooling mode: setting temperature and fan speed can be adjusted automatically; if users have adjusted the setting temperature
and setting fan speed, it will run according to the adjusting status. 30mins later, it will turn back to auto adjusting status.
Heating, fan, dry and auto mode: the running status is the same as that in common mode.
4. Selection button for setting temperature ( ▲and ▼)
(1) During the status when don’t set the function, after pressing ▲ button or ▼button for once, the setting temperature will increase or
decrease for 1
ć
and the temperature setting range is 16
ć
~30
ć
.
(2) During the status when setting the function, the function can be selected circularly.
˄
the circulatory direction for ▲and▼ is opposite
˅
ķ
up & down
˄
swing
˅˖
swing, stop swinging.
ĸ
right & left (swing): swing, stop swinging.
Ĺ
blow: start up blow, turn off blow.
ĺ
E-HEATER: start up E-HEATER, turn off E-HEATER.
Ļ
TIMER: set timer and it can be adjusted among 0~24hrs. If the time is less than 10hrs, the interval is 0.5hr; if the time is more than
10hrs, the interval is 1hr.
ļ
AIR: start up AIR, turn off AIR.
Ľ
Sleep: start up sleep, turn off sleep.
ľ
Health: start up the electrostatic dedusting, turn off the electrostatic dedusting.
Ŀ
Turbo: start up turbo, turn off turbo.
Notice: room, restaurant and office mode can only be adjusted by buttons on control panel. If controller is receiving the order from
remote controller when it’s running in room, restaurant or office mode, those modes will be quitted and it will run according to the
mode on remote controller.
